混凝土搅拌机皮带松了会有什么影响？
我们对中科聚峰混凝土搅拌机生产中的不旋转问题进行了明确的分析，首先考虑了严重的超载问题，其次考虑了搅拌叶片或侧叶片与箱体内壁之间存在大量的异物。另一个原因是电机皮带太松了。小型混凝土搅拌机的搅拌轴超过了正常的工作负荷，会导致搅拌轴旋转缓慢。如果负荷太大，搅拌轴就会停止。这种情况也会导致混凝土搅拌轴停止转动或转动缓慢。
We have made a clear analysis of the non rotation problem in the production of Zhongke Jufeng concrete mixer. Firstly, we have considered the serious overload problem, secondly, we have considered that there are a large number of foreign matters between the mixing blades or side blades and the inner wall of the box. Another reason is that the motor belt is too loose. The mixing shaft of small concrete mixer exceeds the normal working load, which will cause the mixing shaft to rotate slowly. If the load is too high, the mixing shaft will stop. This condition will also cause the concrete mixing shaft to stop rotating or rotate slowly.
搅拌桨叶或侧桨叶与罐体内壁之间的较大异物也会导致搅拌轴停止。由于混凝土搅拌机的搅拌叶片之间或混凝土罐体的侧壁与罐体内壁之间有较大的间隙，可能会捕获异物。如果小型混凝土搅拌机的混凝土传动带过松，也会导致混凝土搅拌机轴旋转缓慢或停止转动，电机传动带过松，导致传动功率不足。
Large foreign matters between the mixing blade or side blade and the inner wall of the tank will also cause the mixing shaft to stop. Due to the large gap between the mixing blades of the concrete mixer or between the side wall of the concrete tank and the inner wall of the tank, foreign matters may be caught. If the concrete drive belt of small concrete mixer is too loose, it will also cause the concrete mixer shaft to rotate slowly or stop rotating, and the motor drive belt is too loose, resulting in insufficient transmission power.
那么如何解决小型混凝土搅拌机停止转动，混凝土搅拌机超载，搅拌轴停止转动的问题，只需调整进料量，排出多余的物料，降低搅拌轴的转动负荷。当物料附着在侧叶片和内壁上时，搅拌轴停止前总会有尖锐刺耳的摩擦声。此时应立即停止检查，人工清除异物，并调整小型混凝土搅拌机搅拌叶片或侧叶片与箱体内壁之间的间隙。如果混凝土搅拌机的混凝土输送带太松，只需在停止后调整混凝土搅拌机的混凝土输送带的张力即可。
So how to solve the problems of small concrete mixer stop rotating, concrete mixer overload, mixing shaft stop rotating, just adjust the feed quantity, discharge the excess materials, reduce the rotating load of mixing shaft. When the material is attached to the side blade and the inner wall, there will always be sharp and harsh friction sound before the mixing shaft stops. At this time, the inspection shall be stopped immediately, the foreign matters shall be removed manually, and the gap between the mixing blade or side blade of the small concrete mixer and the inner wall of the box shall be adjusted. If the concrete conveyor belt of the concrete mixer is too loose, the tension of the concrete conveyor belt of the concrete mixer can only be adjusted after stopping.
以上是中科聚峰混凝土搅拌机厂家为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：https://www.jfjiaobanche.com
The above is the relevant content introduced by the manufacturer of Zhongke Jufeng concrete mixer. To learn more, please visit the website: https://www.jfjiaobanche.com
