自上料搅拌车行驶中水温过高怎么办？
有这样一种情况，就是我们的驾驶员在驾驶自上料搅拌车的时分会常常发觉这样的一种现象，那就是水的温度过高，这个到底什么情况呢？要怎么处理呢？负责中科搅拌车价格的小编帮你来解决！
There is such a situation, that is, our drivers will often find such a phenomenon when driving the self loading mixer, that is, the water temperature is too high. What is the situation? How to deal with it? Responsible for the price of China Science mixer to help you solve!
一、燃烧发起车时的操作过程不正确。
1、 The operation process of the combustion engine is not correct.
二、冷却介质缺少：①防冻液：好车要求一年四季都要加注防冻液；②水或蒸馏水：暂时代用；③水箱盖漏水。
2、 Lack of cooling medium: ① antifreeze: good cars require filling antifreeze all the year round; ② water or distilled water: temporary substitution; ③ water tank cover leakage.
三、水泵缺点：叶轮打滑或卡死导致正时皮带断掉；叶轮变形。
3、 Disadvantages of water pump: the timing belt is broken due to slipping or jamming of impeller; impeller is deformed.
四、冷却电扇不转：冷却电扇或许由温控开关控制；也或许由水温传感器控制。
4、 The cooling fan doesn't work: the cooling fan may be controlled by a temperature control switch or by a water temperature sensor.
五、水箱堵塞：外部堵塞应用水或气将脏物除掉；内部堵塞会影响冷却液的循环，一起会发作压力，这时会有两种效果，一种是水箱漏水，另一种是在高速行驶时水温特别高。
5、 Water tank blockage: external blockage should be removed by water or air; internal blockage will affect the circulation of coolant, and pressure will occur together. At this time, there will be two effects: one is water tank leakage, the other is that the water temperature is extremely high when driving at high speed.
六、汽缸损蚀：燃烧室与水道冲，这时会从排水管排水或排白烟，构成水箱经常性缺水；水道与油道冲（机油有水呈白色）；水道与水道冲，构成缸体散热不良，尤其在高速时影响更大。
6、 Cylinder erosion: when the combustion chamber and water channel are flushed, the water will be drained from the drain pipe or white smoke will be discharged, which will cause frequent water shortage in the water tank; the water channel and oil channel will flush (the oil will be white with water); the water channel and water channel will cause poor heat dissipation of the cylinder block, especially at high speed.
七、节温器损坏：如想拆掉节温器，此时应把小循环堵上，这样可以保证冷却液全部由水箱散热；装新节温器时应留心是否有过水孔。
7、 Thermostat damage: if you want to remove the thermostat, plug the small circulation at this time, so as to ensure that the cooling liquid is completely dissipated by the water tank; when installing a new thermostat, pay attention to whether there is a water hole.
假设在驾御的时分发现了水温过高就要靠边泊车，但不要当即熄火。因为冷却液的温度现已很高，降温才干已达到限度，这时假设当即熄火，欢娱的冷却液也就间断了循环。过高的温度得不到冷却，发起机也是难以承受的。假设先让发起机怠速作业一会儿，不断循环的冷却液仍是可以减轻高温对发起机的影响。
If you find that the water temperature is too high when driving, you should pull over and park, but don't turn off the engine immediately. Because the temperature of the coolant is now very high, the cooling ability has reached the limit. At this time, if the engine is turned off immediately, the happy coolant will be interrupted circulation. If the temperature is too high to be cooled, the engine is hard to bear. If the engine is allowed to idle for a while, the circulating coolant can still reduce the influence of high temperature on the engine.
自上料搅拌车水温过高的核心原因大概为上面介绍的内容，还有就是必定要留心在水的温度过高情况下千万千万不要灭火，否则就会对发起机构成常性的损害。以上就是负责中科搅拌车价格https://www.jfjiaobanche.com的小编来针对自上料搅拌车在形式中温度过高的解决方案，希望能帮到您！
Since the feeding mixer water temperature is too high, the core reason is probably the content described above, and it is necessary to pay attention to do not extinguish the fire when the water temperature is too high, otherwise it will cause regular damage to the starter. The above is responsible for the price of Zhongke mixer https://www.jfjiaobanche.com From the small series to feed mixer in the form of high temperature solutions, hope to help you!
