在潮湿和潮湿的条件下，您的水泥搅拌车底盘容易受到雨水侵蚀和生锈。大多数车主对自上料搅拌车底盘防护都有一定的了解，但是如何选择水泥搅拌车底盘装甲施工车间，如何识别施工质量，是大多数车主非常关心的问题。材料技术是水泥搅拌车底盘装甲建设的关键。目前常用的水泥搅拌车底盘密封塑料加工一般只采用单柔性树脂材料或沥青材料。3M水泥搅拌车底盘装甲材料由四款性能独特的产品组成。采用多层涂覆的方法，实现多种功能的保护。具有高附着力、高耐磨性、抗冲击(高弹性)、耐腐蚀、耐噪音等综合功能。

In wet and humid conditions, your cement mixer chassis is vulnerable to rain erosion and rust. Most car owners have a certain understanding of the chassis protection of self loading mixer, but how to select the armored construction workshop of cement mixer chassis and how to identify the construction quality are the issues that most car owners are very concerned about. Material technology is the key to the construction of cement mixer chassis armor. At present, the commonly used cement mixer chassis sealing plastic processing only uses single flexible resin material or asphalt material. 3M professional cement mixer chassis armor material is composed of four products with unique performance. Multi layer coating method is adopted to realize multi-function protection. With high adhesion, high wear resistance, impact resistance (high elasticity), corrosion resistance, noise resistance and other comprehensive functions.
             

在施工上，自上料搅拌车底盘装甲也有讲究。无论新车还是旧车，首先必须全 面检查水泥搅拌车底盘状况，清除污垢、锈迹、油层;使用压缩空气吹干水泥搅拌车底盘;做好车身盖、盖件:排气管、制动鼓、制动器、减震器、油箱管路、发动机底部、可拆卸螺栓、四轮驱动后桥螺栓。然后开始喷涂施工，说到喷涂是关键的，喷枪喷嘴离水泥搅拌车底盘施工表面应保持25厘米左右的距离，缓慢而均匀地移动，以保证喷涂层的均匀性。根据不同工艺的选择，连续喷涂具有高吸附、高强度、高耐磨性的材料。整个水泥搅拌车底盘喷涂4 - 12次，每次干燥间隔15 - 30分钟。喷药后，下一步是移除障碍物并修复它。多功能混凝土搅拌车底盘装甲建成后，可以提高驾驶安全性和舒适性，使混凝土搅拌车的综合功能得到充分体现。

In the construction, the chassis armor of self loading mixer is also particular. Whether the new car or the old car, first of all, we must comprehensively check the condition of the cement mixer chassis, remove the dirt, rust and oil layer; use compressed air to dry the cement mixer chassis; do a good job in the body cover and cover parts: exhaust pipe, brake drum, brake, shock absorber, fuel tank pipeline, bottom of the engine, detachable bolts, four-wheel drive rear axle bolts. Then start spraying construction. When it comes to spraying, spraying is the key. The distance between the spray gun nozzle and the construction surface of cement mixer chassis should be about 25 cm, and move slowly and evenly to ensure the uniformity of spraying layer. According to the selection of different processes, continuous spraying of materials with high adsorption, high strength and high wear resistance. The whole cement mixer chassis is sprayed 4-12 times, and each drying interval is 15-30 minutes. After spraying, the next step is to remove the obstacle and repair it. After the construction of multifunctional concrete mixer chassis armor, the driving safety and comfort can be improved, and the comprehensive functions of concrete mixer can be fully reflected.