常检查混凝土自上料搅拌车厂家的刹车片和水温！
混凝土自上料搅拌车厂家的刹车片关于每一位车主来说都是十分重要的，为了确保了跋涉中的安全。一般一般来说，一个杰出的刹车片应具有4大底子要求：
The brake pads of concrete self loading mixer manufacturers are very important for every car owner, in order to ensure the safety of trekking. Generally speaking, an outstanding brake pad should have four basic requirements:
1.混凝土自上料搅拌车适合的抵触系数。抵触系数是抵触材料的底子参数，抉择底子的刹车片制动力矩。国标就严格要求制造商有必要在包装上注明抵触系数。抵触系数有必要恰当，太高会构成制动过程中的车轮抱死、方向失控和烧片，太低则制动距离过长。
1. Suitable resistance coefficient of concrete self loading mixer. The friction coefficient is the base parameter of the friction material, which determines the brake torque of the base. The national standard strictly requires the manufacturer to indicate the coefficient of conflict on the package. If the coefficient of friction is too high, the wheel will lock up, the direction will be out of control and the disc will burn. If the coefficient is too low, the braking distance will be too long.
2.合理的混凝土自上料搅拌车寿数。运用寿数是咱们广泛注重的产品方针。一般刹车片能确保3万公里的运用寿数。像刹车片资猜中选用的大颗粒石墨和黄铜还能够削减对刹车盘的磨损。
2. Reasonable life of concrete self loading mixer. Using longevity is the product policy that we pay attention to extensively. The general brake pad can ensure the service life of 30000 km. For example, the large particle graphite and brass used in the brake pad selection can also reduce the wear of the brake disc.
3.满足的舒适性。混凝土自上料搅拌车舒适性功能的直接体现，包括制动感觉、噪音、粉尘、冒烟、异味等。跟着私家车的增多和人们生活水平的前进，在满足安全的底子前提下，舒适性越来越成为抵触片的重要方针。
3. Satisfied comfort. The comfort function of concrete self loading mixer is directly reflected, including braking feeling, noise, dust, smoke, peculiar smell, etc. With the increase of private cars and the progress of people's living standards, comfort has become an important policy under the premise of safety.
4.可靠的安全性。混凝土自上料搅拌车厂家刹车片在制动时会发生瞬时的高温，尤其在高速跋涉或紧急制动时。在高温状况下，抵触片的抵触系数会下降，称为热衰退性。热衰退性的凹凸抉择高温状况和紧急制动时的安全。
4. Reliable security. The brake pads of self loading concrete mixer will have instantaneous high temperature when braking, especially when high-speed trekking or emergency braking. Under the condition of high temperature, the coefficient of resistance will decrease, which is called heat recession. High temperature condition and emergency braking safety in case of heat recession.
有这样一种状况，便是咱们的驾驭员在驾驭混凝土自上料搅拌车的时分会常常发觉这样的一种现象，那便是水的温度过高，这个究竟什么状况呢？
There is such a situation that our drivers often find such a phenomenon when driving the concrete self loading mixer truck, that is, the water temperature is too high. What is the situation?
一、焚烧建议车时的操作过程不正确。
1、 The operation process is not correct when burning the vehicle.
二、冷却介质短少：①防冻液：高 级车要求一年四季都要加注防冻液；②水或蒸馏水：暂时代用；③水箱盖漏水。
2、 Short of cooling medium: 1. Antifreeze: high-grade cars are required to be filled with antifreeze all year round; ② Water or distilled water: temporary substitute; ③ The water tank cover is leaking.
三、混凝土自上料搅拌车水泵缺陷：叶轮打滑或卡死导致正时皮带断掉；叶轮变形。
3、 Defects of water pump of concrete self loading mixer: impeller slipping or stuck, resulting in broken timing belt; The impeller is deformed.
四、冷却电扇不转：冷却电扇或许由温控开关操控；也或许由水温传感器操控。
4、 Cooling fan does not turn: cooling fan may be controlled by temperature control switch; Or maybe it's controlled by a water temperature sensor.
五、混凝土自上料搅拌车水箱阻塞：外部阻塞应用水或气将脏物除去；内部阻塞会影响冷却液的循环，一起会发生压力，这时会有两种作用，一种是水箱漏水，另一种是在高速行驶时水温特别高。
5、 Water tank blockage of concrete self loading mixer: external blockage shall be removed by water or air; Internal blockage will affect the circulation of coolant, and pressure will occur together. At this time, there will be two effects, one is water leakage in the water tank, and the other is particularly high water temperature when driving at high speed.
六、汽缸损蚀：焚烧室与水道冲，这时会从排水管排水或排白烟，构成水箱经常性缺水；水道与油道冲（机油有水呈白色）；水道与水道冲，构成缸体散热不良，尤其在高速时影响更大。
6、 Cylinder erosion: when the combustion chamber is flushed with the water channel, the water will be drained or white smoke will be discharged from the drain pipe, resulting in frequent water shortage of the water tank; Water channel and oil channel flushing (the engine oil is white when there is water); The water channel and the water channel rush together, resulting in poor heat dissipation of the cylinder block, especially at high speed.
七、节温器损坏：如想拆掉节温器，此刻应把小循环堵上，这样能够确保冷却液悉数由水箱散热；装新节温器时应留神是否有过水孔。
7、 Thermostat damage: if you want to remove the thermostat, you should plug the small circulation at this moment, so as to ensure that all the coolant is dissipated by the water tank; Pay attention to whether there are water holes when installing a new thermostat.
假定在驾驭混凝土自上料搅拌车的时分发现了水温过高就要靠边泊车，但不要当即熄火。由于冷却液的温度现已很高，降温才华已达到极限，这时假定当即熄火，欢娱的冷却液也就间断了循环。过高的温度得不到冷却，建议机也是难以承受的。假定先让建议机怠速作业一瞬间，不断循环的冷却液仍是能够减轻高温对建议机的影响。
If the water temperature is too high when driving the concrete self loading mixer, it is necessary to pull over and park, but do not turn off the engine immediately. Because the temperature of the coolant is now very high, the cooling ability has reached the limit. At this time, it is assumed that the engine will be turned off immediately, and the entertainment coolant will be interrupted. Too high temperature can't be cooled, so it's hard to bear. Assuming that the recommender idles for a moment, the continuous circulation of coolant can still reduce the impact of high temperature on the recommender.
混凝土自上料搅拌车水温过高的原因大约为上面介绍的内容，还有便是必定要留神在水的温度过高状况下千万千万不要救活，不然就会对建议机构成持久性的危害。
The central reason for the high water temperature of the concrete self feeding mixer is about the content described above. In addition, we must pay attention not to revive the mixer when the water temperature is too high, or it will cause lasting harm to the mixer.
本文由混凝土自上料搅拌车厂家整理提供，希望以上内容对大家有所帮助，如想了解更多精彩内容请点击官网：https://www.jfjiaobanche.com。
This article is provided by the manufacturer of self loading concrete mixer. I hope the above contents can help you. For more wonderful contents, please click the official website: https://www.jfjiaobanche.com .
