自动铲料搅拌车的热维护应该注意什么？
自装载式搅拌车在长期运行过程中会自然发热，但是超过设备本身可以承受的温度，会对设备造成一定的损害。因此，如果设备温度过高，则应执行相应的维护工作。让我们来看看。
Self loading mixer will generate heat naturally during long-term operation, but it will cause certain damage to the equipment if it exceeds the temperature that the equipment can bear. Therefore, if the equipment temperature is too high, carry out corresponding maintenance work. Let's have a look.
防止发动机过热：由于环境温度高，发动机容易过热。有必要加强对发动机冷却系统的检查和维护。请注意，这包括检查水箱，恒温器，水泵，风扇等，并会及时补充。注意冷却水。当水温超过100°C时，请停在阴凉处进行冷却，让发动机空转并打开机盖以散热。
Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of the engine cooling system. Please note that this includes checking the water tank, thermostat, water pump, fan, etc., and will be replenished in time. Pay attention to cooling water. When the water temperature exceeds 100 ° C, please stop in a cool place for cooling, let the engine idle and open the cover to dissipate heat.
防止发动机爆燃：夏季温度很高，有时可能会超过35°C。本赛季部分耗尽的汽车发生自然爆燃的可能性更高。因此要做好预防工作。
Prevent engine deflagration: the temperature is very high in summer, and sometimes it may exceed 35 ° C. The possibility of natural deflagration of partially depleted cars this season is higher. Therefore, we should do a good job in prevention.
防止损坏汽车漆：暴露于强烈阳光下，汽车漆会老化并产生皱纹，而普通的美容蜡具有一定的防晒作用，但是汽车蜡中含有铋因此，油漆会因长期的紫外线而生锈。留下一个黑点。车蜡本身并不能提高硬度或抗紫外线效果，但由于高温会很快消失。停车时，请将车停在凉爽的地方。
Prevent damage to car paint: when exposed to strong sunlight, the car paint will age and wrinkle. Ordinary beauty wax has a certain sunscreen effect, but the car wax contains bismuth. Therefore, the paint will rust due to long-term ultraviolet rays. Leave a black spot. Car wax itself does not improve hardness or UV resistance, but it will disappear quickly due to high temperature. When parking, please park your car in a cool place.
防止汽车轮胎爆裂。如果温度过高，则容易发生爆胎，如果温度过高，则轮胎容易变形，拉伸强度降低。轮胎本身具有非标准的充气压力，由于老化，性能差以及行驶时轮胎在硬质金属或其他硬物上的滚动，会导致车辆突然爆裂。
Prevent car tires from bursting. If the temperature is too high, the tire is easy to burst. If the temperature is too high, the tire is easy to deform and the tensile strength is reduced. The tire itself has non-standard inflation pressure. Due to aging, poor performance and the rolling of the tire on hard metal or other hard objects during driving, the vehicle will burst suddenly.
防止发动机润滑不良：在高温下，机油粘度降低，润滑不良。因此，请检查机油质量并及时添加或更换机油。注意及时清洁机油滤清器和散热器，以确保机油畅通并散热良好，并避免发动机过载。
Prevent poor engine lubrication: under high temperature, the oil viscosity decreases and the lubrication is poor. Therefore, please check the oil quality and add or change the oil in time. Pay attention to timely clean the oil filter and radiator to ensure smooth oil and good heat dissipation, and avoid engine overload.
防止制动故障：在高温环境下，制动液容易蒸发和蒸发，在制动管中形成空气阻力。另外，刹车蹄很容易磨损，刹车会损坏。因此，必须经常检查和调整制动系统。在长山上，您需要注意驻车制动器，以确保良好的制动性能。如果制动轮毂很热，请停止并使其冷却。
Prevent braking failure: in high temperature environment, the brake fluid is easy to evaporate and evaporate, forming air resistance in the brake pipe. In addition, the brake shoes are easy to wear and the brake will be damaged. Therefore, the brake system must be checked and adjusted frequently. On Changshan, you need to pay attention to the parking brake to ensure good braking performance. If the brake hub is hot, stop and allow it to cool.
众所周知，机械是在3点和7点钟进行维护的。只有这样，才能保证设备在正常运行下的良好性能，并能延长设备的使用寿命。希望每个人都可以遵循这一知识，合理使用该工具。
As we all know, the machinery is maintained at 3 and 7 o'clock. Only in this way can we ensure the good performance of the equipment under normal operation and prolong the service life of the equipment. I hope everyone can follow this knowledge and use the tool reasonably.
