混凝土自上料搅拌车设备称量不准确现象
混凝土自上料搅拌车这一设备使用过程中并不是说一个问题都不会出现的，近来有用户反映，设备出现了称量不准确的现象。那么混凝土自上料搅拌车厂家认为要想解决掉这个问题就需要找到其发生根源。
Concrete mixing truck from the loading of this equipment in the process of use is not to say that a problem will not appear, recently there are users reflect that the equipment is not accurate weighing phenomenon. Then the concrete mixing truck manufacturers think that in order to solve this problem, we need to find the root of its occurrence.
可以肯定的是，自上料搅拌车的效率是非常不错的，对中小工程来讲是再强不过的得力助手。混凝土自上料搅拌车配备自动称量系统，能根据所需混凝土硬度计算出各原料用量，生产出的混凝土符合国标，不需要担心打地坪的混凝土质量不佳。
To be sure, the efficiency of the mixing truck is very good, and it is a strong right-hand man for small and medium-sized projects. The concrete mixing truck is equipped with an automatic weighing system, which can calculate the amount of raw materials according to the required hardness of concrete. The concrete produced meets the national standard, and there is no need to worry about the poor quality of concrete for the floor.
固定在称重系统和框架之间的螺丝没有拆下，传感器失效，悬挂系统失灵。只要我们大致知道根本原因在哪里，那么我们就可以一一检查。如果螺栓没有固定好，拆下螺栓重新固定或更换一个新的！
The screws between the weighing system and the frame were not removed, the sensors failed, and the suspension failed. As long as we know roughly where the root causes are, then we can examine them all. If the bolt is not secured, remove the bolt and reinstall it or replace it with a new one!
传感器故障较多，如传感器漂移，需要重新校准称重系统；如果传感器的输入输出电阻发生变化，则说明引线的端子或焊点脱落，需要对这些部位进行检查维修。
Many sensor faults, such as sensor drift, need to recalibrate weighing system; If the input and output resistances of the sensor change, it indicates that the terminals or solder joints of the lead are off. You need to check and repair these parts.
传感器与控制仪表的连接断开也会影响称重的准确性，此时需要检查它们之间的线路；如果传感器损坏，需要更换新的传感器；传感器密封不良会导致内部芯片受潮，也会影响混凝土配料机的精度，所以须定期检查传感器。
The disconnection between sensor and control instrument will also affect the accuracy of weighing, at this time need to check the line between them; If the sensor is damaged, replace it with a new one. Poor sealing of the sensor will lead to moisture in the internal chip, and also affect the accuracy of the concrete batching machine, so the sensor must be checked regularly.
平时，混凝土自上料搅拌车设备的保养要注意：保持设备各部位电机干净，没有灰尘；经常检查电机的外观，看是否有零件错位；经常的检查一下轴承进行更换或加油，还要检查进线接线头。
At ordinary times, the maintenance of concrete mixing truck equipment should pay attention to: keep the motor of each part of the equipment clean, no dust; Regularly check the appearance of the motor to see if there are parts misplaced; Often check the bearing for replacement or refueling, but also check the incoming wiring head.
关于混凝土自上料搅拌车设备的称量问题我们就分析到这，如果您还有其他关于混凝土自上料搅拌车的问题，欢迎来我们网站上http://www.jfjiaobanche.com留言讨论。
On the material in the concrete since the truck mixer equipment weighing problem we analysis to it, if you have other questions about concrete from feeding mixers, welcome to our website http://www.jfjiaobanche.com comments.
