全自动搅拌车轮胎偏磨是怎么回事？
全自动搅拌车主要使用在工程建筑中，在这样恶劣的环境中，对搅拌车的影响是非常大的，比如搅拌车的轮胎，道路的高低不平会加速轮胎的磨损，那么这是怎么回事呢？
Automatic agitator is mainly used in engineering and construction. In such a harsh environment, the impact on the agitator is very large, such as the tires of the agitator. The uneven road will accelerate the tire wear, so what is going on?
很多人认为搅拌车轮胎的偏磨是车轮的外倾角超差造成的，但其实轮胎的偏磨在很大程度上是因前束值的超差造成的，根据全自动搅拌车厂家总结的经验和大量的定位检测数据分析认为：正确的前束值完全可以有效的避免轮胎的偏磨。
Many people think of mixers the eccentric wear of the tire is caused by wheel camber Angle super bad, but actually the eccentric wear of the tire is largely caused by former bunch of value out-of-tolerance, according to the manufacturer of automatic mixers summed up experience and the analysis of the localization testing data of a large number of: right toe value can effectively prevent the eccentric wear of the tire.
还有一种轮胎偏磨是转向轮总转角的超差、车轮外倾角和主销倾角的不正确导致的，搅拌车在实际的行驶中，大多数是直线行驶的，转弯、倒车和掉头时的总转角的时间不多，所以由此引发的偏磨比较少。
There is also a tire bias wear is caused by the deviation of the maximum total Angle of the steering wheel, wheel camber Angle and the incorrect Angle of the kingpin. In the actual driving of the agitator, most of them are straight driving, and the maximum total Angle of turning, reversing and turning is not much time, so the resulting bias wear is less.
搅拌车轮胎与地面接触时的柔韧性和随意变形的特性很大程度上抵消了因车轮外倾角可能造成的轮胎偏磨，即便是高压轮胎超差的车轮外倾角对轮胎的磨损影响也不大，有很多的厢式货车在空车的时候为了减少轮胎与地面的摩擦、降低滚动阻力而专门设计了可变后轮外倾角。
The flexibility and random deformation of agitator tires in contact with the ground largely offset the tire deviation caused by camber Angle. Even the camber Angle of high-pressure tires has little influence on tire wear. There are many van when empty in order to reduce tire and ground friction, reduce rolling resistance and specially designed variable rear wheel camber.
全自动搅拌车厂家认为从设计上考虑，为了约束搅拌车在直线行驶中车轮外倾角造成的轮胎偏磨，对搅拌车设定了一定的前束值，由于搅拌车行驶不同的路面情况和颠簸、冲撞、机件磨损等因素的存在，即使是很坚固的搅拌车，它原有的定位角度都要不同程度的因上述原因逐渐改变原前束值。
Automatic agitator manufacturers think that from the point of view of design, in order to restrain the wheel camber caused by tire wear in straight line driving of agitator, a certain front bundle value is set for the agitator. Due to the existence of different road conditions and turbulence, collision, parts wear and other factors of the agitator, even if it is a very solid agitator, Its original positioning Angle should gradually change the original front beam value due to the above reasons to varying degrees.
总之，全自动搅拌车的轮胎还是很重要的，平时要多注意轮胎的偏磨问题，做好搅拌车轮胎的保养才是，更多内容的了解就来网站www.jfjiaobanche.com吧！
In a word, the tires of fully automatic mixer are still very important. At ordinary times, we should pay more attention to the tire wear problem and do a good job in the maintenance of the tires of mixer. For more information, come to the website www.jfjiaobanche.com!
