搅拌车的安装与拆卸过程需注意很多事项！
我们在安装与拆卸搅拌车的过程中有非常多需要关注的问题，如果大家在平时对这方面只是的了解不多的话，就跟着小编一起来看一看相关内容吧。
We have a lot of problems to pay attention to in the process of installation and disassembly of mixing truck. If you don't know much about this at ordinary times, let's follow the small series to take a look at the relevant content.
混凝土自上料搅拌车轴承的安装、拆卸方法，应根据轴承的结构、尺寸大小和与轴承部件的配合性质而定。安装、拆卸的压力应直接加在紧配合的档圈端面上，不能通过滚动体传递压力。
The installation and disassembly methods of bearings of concrete self-feeding mixer truck should be determined according to the structure, size and matching nature of bearing components. The pressure of installation and disassembly should be directly added to the end face of the tightly matched gear ring, and the pressure can not be transferred through the rolling body.
因为这样会在轴承工作表面造成压痕，影响轴承正常工作，甚至会使轴承损坏。轴承的保持架、密封圈、防尘盖等零件很容易变形，安装或拆卸轴承的压力不能加在这些零件上。
Because this will cause indentation on the working surface of the bearing, affect the normal operation of the bearing, and even make the bearing damaged. Bearing cage, sealing ring, dust cover and other parts are easy to deformation, installation or disassembly bearing pressure can not be added to these parts.
轴承内圈与轴是紧配合，外圈与壳体为较松配合，可用压力机将轴承先压装在轴承上，然后将轴连同轴承一起装入壳体中，压装时在轴承端面上垫一软金属材料的装配套管（铜的或软钢管）。装配套管的内径应比轴颈直径略大，外径应小于轴承内径的挡边直径，以免压在保持架上。
The inner ring of the bearing is closely matched with the shaft, while the outer ring is loosely matched with the shell. The bearing can be pressed on the bearing first, and then the shaft and the bearing are loaded into the shell together. When pressing, a soft metal assembly sleeve （copper or soft steel pipe） is padded on the end face of the bearing. The inner diameter of the assembly bushing should be slightly larger than the diameter of the journal, and the outer diameter should be smaller than the diameter of the guard edge of the bearing inner diameter, so as not to press on the cage.
混凝土自上料搅拌车厂家认为，轴承内圈与轴，外圈与壳体孔都是紧配合，装配套管端面应做成能同时压紧轴承内外套圈端面的圆环，或用一圆盘和装配套管，使压力同时传到内外圈上，把轴承压入轴上和壳体中。此种安装方法特别适用于能自动调心的向心球面轴承的安装。
Concrete mixing truck manufacturers think that bearing inner ring and shaft, outer ring and shell hole are closely matched, assembly sleeve end should be made to be able to press the bearing inner and outer ring end ring at the same time, or with a disc and assembly sleeve, so that the pressure is transmitted to the inner and outer ring at the same time, the bearing pressed into the shaft and shell. This installation method is especially suitable for the installation of self-aligning centripetal spherical bearings.
只要大家按照正确的方法安装与拆卸搅拌车的话是不用担心会影响到它的使用的，能够得到不错的使用效果。更多内容就来网站www.jfjiaobanche.com看看相关信息吧。
As long as you install and remove the mixing truck in the correct way, you do not need to worry about affecting its use, and you can get a good use effect. For more information, visit www.jfjiaobanche.com.
