搅拌车如果要改装的话就要符合一定原则
搅拌机的生产需要正确的底盘和正确的顶部才能完成。底盘来自底盘企业制造商，然后在搅拌机改装厂进行改装。今天，我们将普及搅拌机的改装知识。
The production of mixer requires correct chassis and correct top. The chassis is from the chassis brand manufacturer, and then modified in the mixer modification plant. Today, we will popularize the knowledge of mixer modification.
搅拌机改造部分应留有足够的维修空间，特别是润滑点、紧固螺栓、电池和制动部件的操作空间。
Sufficient maintenance space shall be reserved for the mixer reconstruction, especially the operation space for lubrication points, fastening bolts, batteries and braking components.
允许改变发动机的冷却系统，但不能妨碍进气和排气。
It is allowed to change the cooling system of the engine, but the air intake and exhaust shall not be obstructed.
安装改装件时，总成及各部件必须保证通过、操作、可靠、功能齐全、维修方便。
When installing the modified parts, the assembly and all components must ensure safe passage, safe and reliable operation, complete functions and convenient maintenance.
当改装件伸出驾驶室上方时，驾驶室应能自由翻转。
When the refitted parts protrude above the cab, the cab shall be able to turn freely.
全自动搅拌车厂家认为搅拌车改造后的搅拌机的驱动、制动和转向性能不受影响。
The manufacturer of full-automatic mixer thinks that the driving, braking and steering performance of the mixer after the transformation of the mixer will not be affected.
改造后的搅拌机外形尺寸不得超过限值，后悬挂不得超过标准限值。
The overall dimension of the modified mixer shall not exceed the limit value, and the rear suspension shall not exceed the standard limit value.
改装后的搅拌机应保证维修方便。不得随意改变搅拌机轴距。对于加长、缩短车架纵梁、改变横梁位置等特殊情况，必须咨询底盘部技术人员，避免改装出现质量问题。
The modified mixer shall ensure convenient maintenance. It is not allowed to change the wheelbase of the mixer at will. For special cases such as lengthening, shortening the longitudinal beam of the frame and changing the position of the transverse beam, the technical personnel of the chassis department must be consulted to avoid quality problems in the modification.
以上便是问题的相关解答内容了，如果您想获取更多相关信息，就来关注我们网站www.jfjiaobanche.com吧！
The above is the relevant answers to the questions. If you want to get more relevant information, please follow our website!
下一篇：和厂家浅谈关于搅拌车的知识上一篇：搅拌车运送混凝土时搅拌筒转速问题
