搅拌车在操作之前的五个检查方面
混凝土自上料搅拌车在使用之前为了确保正常的运行过程，需要对设备提前做一定检查工作的。那么接下来就跟着混凝土自上料搅拌车厂家一起了解一下当设备在运行之前有哪些问题是需要我们检查了解的。
In order to ensure the normal operation process of the concrete self loading mixer before use, it is necessary to check the equipment in advance. Then we will follow the manufacturer of concrete self feeding mixer truck to find out what problems we need to check before the equipment is put into operation.
1、蓄电池的保养检查：检查蓄电池固定是否牢固。
1. Maintenance and inspection of battery: check whether the battery is firmly fixed.
2、轮胎的检查：每月应在常温下检查一下轮胎气压。
2. Tyre inspection: check the tyre pressure at room temperature every month.
3、离合器总泵液面的检查：离合器液面介于高、低液面间则表示正常，如果低于标准线，则可能是总泵或分泵皮碗损坏。
3. Check the liquid level of the clutch master cylinder: if the liquid level of the clutch is between high and low, it indicates that it is normal. If it is below the standard line, it may be that the master cylinder or slave cylinder cups are damaged.
4、制动液面的检查：制动也在高、低位之间则表示正常。
4. Check the brake fluid level: if the brake fluid level is between high and low, it means that it is normal.
5、发动机冷却液液面检查：发动机在热机状态时，千万不要打开散热器盖，否则可能会被溅出的冷却液或高温蒸气烫伤。等发动机冷却后，检查冷却液的液面应处于满位和低位之间，否则应加蒸馏水或纯净水或冷冻液，加水后的液面高度不能超过满位。如发现短时间内冷却液减少的很快搅拌，混凝土自上料搅拌车检查步骤应检查冷却系统是否有泄漏或到维修站去检查。
5. Check the engine coolant level: Never open the radiator cap when the engine is hot, or you may be scalded by the spilled coolant or high temperature steam. After the engine cools down, check that the coolant level should be between full and low, otherwise add distilled water or purified water or refrigerant, and the liquid level after adding water should not exceed full. If it is found that the cooling liquid decreases in a short time and the concrete is mixed quickly, the concrete shall be inspected from the charging mixer truck to check whether the cooling system leaks or go to the maintenance station to check.
自动上料搅拌机操作环境通常都不是很好，这也导致需要我们对设备在操作之前有详细的了解才行。在确保设备不存在有任何故障问题之后才能够操作使用设备正常运行，避免在操作中可能存在的各种不良问题。关注我们https://www.jfjiaobanche.com了解更为详细的内容！
The operating environment of the automatic feeding mixer is usually not very good, which also requires us to have a detailed understanding of the equipment before operation. The equipment can only be operated and used normally after ensuring that there are no faults in the equipment, so as to avoid various adverse problems that may exist in the operation. Follow us https://www.jfjiaobanche.com Learn more!
