混凝土自上料搅拌车叶片故障的维修
叶片作为混凝土自上料搅拌车设备重要组成部分之一，对搅拌过程有直接影响，并且叶片质量在一定程度上能够决定搅拌车使用的寿命，因此在搅拌车使用的过程当中，叶片损坏的程度往往比较高，所以需要重视叶片维修技术。混凝土自上料搅拌车厂家为您讲解具体维修内容：
As one of the important components of the concrete self loading mixer, the blade has a direct impact on the mixing process, and the blade quality can determine the service life of the mixer to a certain extent. Therefore, the blade damage is often high during the use of the mixer, so it is necessary to pay attention to the blade maintenance technology. The manufacturer of concrete self feeding mixer will explain the specific maintenance contents to you:
混凝土自上料搅拌车在每次结束搅拌之后，需要立即清洗搅拌车的叶片，从而及时清除叶片的污垢。搅拌车的叶片以及振动轴承应当滴加润滑油，同时要对搅拌车叶片进行防生锈以及除锈处理。
The blades of the self feeding concrete mixer truck shall be cleaned immediately after each mixing, so as to remove the dirt on the blades in time. The blades and vibration bearings of the mixer shall be dripped with lubricating oil, and the blades of the mixer shall be subject to rust prevention and rust removal.
其次是要定期检查搅拌车的叶柄以及叶片焊接质量，并且检查叶片磨损消耗的状况，一旦发现存在异常问题，需要及时记录并进行更换维修，检测叶片底部的导通状况，避免叶片的焊接点出现漏电。
Secondly, the welding quality of the blade handle and blade of the mixer shall be checked regularly, and the wear and consumption of the blade shall be checked. Once any abnormal problem is found, it shall be timely recorded and replaced for maintenance, and the conduction condition at the bottom of the blade shall be checked to avoid power leakage at the welding point of the blade.
再次是在搅拌的过程当中，维修人员应当注意辨别叶片运转的声响，认真检查叶片运转的速度以及力度，防止出现断裂故障。
Thirdly, in the process of mixing, maintenance personnel should pay attention to identify the sound of blade operation, carefully check the speed and strength of blade operation, and prevent fracture failure.
要做好搅拌车叶片耐磨损的处理，根据搅拌车运行的要求，合理调整搅拌车叶片以及衬板间的距离，并且根据叶片状况在叶片上使用锘或者锰等材料，改善搅拌车叶片的强度以及耐磨度。
It is necessary to properly handle the abrasion resistance of the mixer's blades, reasonably adjust the distance between the mixer's blades and lining plates according to the requirements of the mixer's operation, and use materials such as nano meter or manganese on the blades according to the condition of the blades to improve the strength and abrasion resistance of the mixer's blades.
除了上述维修技术，要想确保搅拌车的正常运行，还需要完善机械维修制度。一方而是要建立计划维修制，使用过程当中根据维修计划制定科学的维修间隔，从预防为主的原则出发保证搅拌车运行状态良好。另一方面是要建立状态维修制。您要了解详细内容就来我们网站https://www.jfjiaobanche.com咨询吧！
In addition to the above maintenance technologies, in order to ensure the normal operation of the mixer, it is also necessary to improve the mechanical maintenance system. On the one hand, it is necessary to establish a planned maintenance system, formulate scientific maintenance intervals according to the maintenance plan during the use process, and ensure that the mixer operates well from the principle of prevention first. On the other hand, it is necessary to establish a condition based maintenance system. Come to our website if you want to know more https://www.jfjiaobanche.com Consult!
