全自动搅拌车防抱死系统出现故障时的检查方法
全自动搅拌车在使用过程中防抱死系统出现故障,从而影响搅拌车的正常工作.为了尽快解决故障,必须先找出故障的原因.下面根据全自动搅拌车厂家从事搅拌车维修的经验,为大家介绍一下全自动搅拌车防抱死系统出现故障时的检查方法.
In order to solve the problem as soon as possible, it is necessary to find out the cause of the problem. Next, according to the experience of the manufacturer of the automatic mixer in the maintenance of the mixer, we will introduce the inspection methods when the anti-lock system of the automatic mixer breaks down
一、检查全自动搅拌车的驻车制动是否完全释放。
1、 Check whether the parking brake of the automatic mixer is fully released.
二、检查制动储液罐液面是否符合说明书的规定。
2、 Check whether the fluid level of the brake fluid reservoir meets the requirements of the manual.
三、检查所有的制动管路有无损坏变形和泄漏迹象。
3、 Check all brake pipes for damage, deformation and leakage.
四、检查防抱死系统的所有熔断丝是否完好,导线是否破损,插座是否牢固。
4、 Check whether all fuses of the anti-lock system are in good condition, whether the wires are damaged, and whether the sockets are firm.
五、检查蓄电池容量和电压是否符合规定,正负极导线的连接是否可靠。
5、 Check whether the capacity and voltage of the battery meet the requirements, and whether the positive and negative wire connections are reliable.
六、检查防抱死系统、ECI_I插接器连接是否牢靠。
6、 Check anti-lock system and ECI_ I Check whether the connector is firmly connected.
七、检查电路连接处是否腐蚀、损坏、松脱或接触不良,ABS的各搭铁线搭铁是否可靠。
7、 Check whether the circuit connection is corroded, damaged, loose or in poor contact, and whether the grounding wire of ABS is reliable.
八、检查轮胎是否符合要求。
8、 Check whether the tyres meet the requirements.
九、检查全自动搅拌车的车轮转动有无阻滞,轮毂轴承间隙是否正常。
9、 Check whether the wheel rotation of the fully automatic mixer is blocked and whether the hub bearing clearance is normal.
全自动搅拌车防抱死系统出现故障时的检查方法就从以上所讲解的9个方面来做，当然平常使用中要想安全顺利使用下去，就要定期对其进行检查维护。更多事项就来我们网站https://www.jfjiaobanche.com咨询！
When the anti-lock braking system of the automatic mixer breaks down, the inspection methods should be done from the above nine aspects. Of course, if you want to use it safely and smoothly in normal use, you should check and maintain it regularly. Come to our website for more matters https://www.jfjiaobanche.com consulting service
