全自动搅拌车的搅拌槽部件的使用
全自动搅拌车主要是用来运输施工混凝土的卡车，使用的圆柱形搅拌筒运输搅拌好的混凝土。在运输过程中，搅拌筒可以保持转动，这样可以让混凝土不会出现凝固现象。混凝土运输完毕后，通常用水冲洗搅拌筒内部，以防止硬化的混凝土占用空间，减少搅拌筒的体积。那么，您对搅拌槽部件有多少了解呢？下面全自动搅拌车厂家小编就为大家介绍一下：
Full-automatic mixer truck is mainly used to transport construction concrete, and the cylindrical mixing drum is used to transport the mixed concrete. During transportation, the mixing drum can keep rotating, so that the concrete will not solidify. After the concrete is transported, the inside of the mixing drum is usually washed with water to prevent the hardened concrete from occupying space and reduce the volume of the mixing drum. So, how much do you know about mixing tank components? The following is a brief introduction to the manufacturer of automatic mixer:
搅拌罐是搅拌车的重要部件之一，要求的技术含量比较高，其技术含量会直接影响混凝土的质量，所以搅拌罐的设计比较高，公差范围要小。搅拌槽内的叶片一般我们使用的是双对数螺旋。
The mixing tank is one of the important parts of the mixing truck, which requires high technical content, which will directly affect the quality of concrete. Therefore, the design of the mixing tank is relatively high and the tolerance range is small. Generally, we use double logarithmic spiral for the blades in the mixing tank.
搅拌槽内的叶片有效的提高了混凝土的卸料的性能，出料口前的叶片上一般都带有孔洞，这样可以有效的降低了混凝土对叶片的粘结性能，提高出料的平均性。整个叶片从搅拌罐底部的滑动角度不断增加，以确保叶片能充分搅拌混凝土，降低残留率。
The blades in the mixing tank effectively improve the discharge performance of the concrete. The blades in front of the discharge port are generally provided with holes, which can effectively reduce the bonding performance of the concrete to the blades and improve the average of the discharge. The sliding angle of the whole blade from the bottom of the mixing tank is continuously increased to ensure that the blade can fully mix the concrete and reduce the residual rate.
我们知道一般搅拌罐的材质都会使用到高强度的钢板，在搅拌罐成型后，拆下内支架，焊接叶片。焊接工艺我们一般使用的是碳氧化物保护膜，搅拌罐制作后进行喷丸处理，消除焊接和制作过程中产生的应力，提高镀层的附着力。
We know that high strength steel plate will be used for the material of general mixing tank. After the mixing tank is formed, remove the inner support and weld the blades. We generally use carbon oxide protective film for welding process. After the mixing tank is manufactured, shot peening is carried out to eliminate the stress generated during welding and manufacturing and improve the adhesion of the coating.
关于全自动搅拌车的搅拌槽部件使用知识讲解就是以上内容，相信大家一定对它更加感兴趣了吧，更多信息欢迎来电https://www.jfjiaobanche.com咨询。
The explanation of the use of the mixing tank components of the fully automatic mixer is the above content. I'm sure you are more interested in it. For more information, welcome to call https://www.jfjiaobanche.com consulting service
