如何处理混凝土自上料搅拌车的粘度过高？
我们在使用混凝土自动搅拌的过程中，可能会遇到粘度太高这个问题，那么我们应该如何处理呢？混凝土自上料搅拌车厂家为您解答：
In the process of using automatic concrete mixing, we may encounter the problem of too high viscosity, so how should we deal with it? The manufacturer of concrete self-feeding mixer truck will answer for you:
润滑油粘度过低，它的润滑效果就会降低，这样就会增加了混凝土自上料搅拌车部件在运行过程中的摩擦力，使减速机运行时克服了摩擦功，同时也会产生大量的热量，让减速机温度升高。
If the viscosity of lubricating oil is too low, its lubricating effect will be reduced, which will increase the friction force of the parts of the concrete self-feeding mixer during the operation, so that the friction work can be overcome during the operation of the reducer, and at the same time, a large amount of heat will be generated, which will increase the temperature of the reducer.
如果是混凝土自上料搅拌车机粘度过高的话，就会增加设备的承载力、摩擦力，从而产生巨大的热量。
If the viscosity of the concrete self-feeding mixer is too high, it will increase the bearing capacity and friction of the equipment, thus generating huge heat.
我们需要准备好紧急驱动软管，将故障混凝土搅拌车熄火，卸下液压马达上的高压油管接头。将救援车熄火，将其液压马达的高压油管卸下，并与故障车上的对应接头用紧急驱动软管相连。
We need to prepare the emergency drive hose, turn off the faulty concrete mixer, and remove the high-pressure oil pipe connector on the hydraulic motor. Turn off the rescue vehicle, remove the high-pressure oil pipe of its hydraulic motor, and connect it with the corresponding connector on the faulty vehicle with the emergency drive hose.
发动救援车，将其操纵手柄拨至出料位置，故障车内的混凝土即被排出。紧急驱动完毕后，将驱动软管卸下，并恢复两车原状。在托轮和滚道之间放入木楔，以控制搅拌筒的旋转，要注意安全。
Start the rescue vehicle, move its control handle to the discharge position, and the concrete in the fault vehicle will be discharged. After the emergency drive is completed, remove the drive hose and restore the two vehicles to their original state. Put a wooden wedge between the supporting roller and the raceway to control the rotation of the mixing drum. Pay attention to safety.
选购时，对厂家的技术能力和售后服务能力进行核实。一般通过电话沟通和光顾厂家网站都能有个大致的了解，售后服务及时周到的厂家，才不会给用户带来麻烦或影响生产。
When purchasing, verify the technical capability and after-sales service capability of the manufacturer. Generally, we can have a general understanding through telephone communication and visiting the manufacturer's website. Only the manufacturer with timely and considerate after-sales service will not cause users trouble or affect production.
如果大家还有什么不明白的地方大家可以向小编https://www.jfjiaobanche.com进行咨询，小编会及时的为大家进行讲解与解答相关知识。
If there is anything you don't understand, you can ask Xiaobian https://www.jfjiaobanche.com For consultation, the editor will explain and answer relevant knowledge for you in a timely manner.
下一篇：自上料搅拌车如何行驶工作？上一篇：全自动搅拌车在注入油前需要注意的动作
