全自动搅拌车操作须知的五项重要内容
全自动搅拌车结构组成如按自成系统的机构来划分，它基本包括搅拌筒及其附属装置、搅拌筒的驱动装置，动力设备和运载底盘几个主要系统。下面全自动搅拌车厂家来讲讲操作须知的五项重要内容吧。
The structural composition of a fully automatic mixing truck is divided into several main systems, including the mixing drum and its auxiliary devices, the driving device of the mixing drum, the power equipment, and the carrier chassis, according to the self-contained system. Let's talk about the five important contents of operating instructions for fully automatic mixer truck manufacturers below.
1、车辆在进行卸料的时候，若是有出现了水分蒸发，塌落度有偏低而不能够满足于客户的要求的时候，可以适量的往筒中添加水，再以10—14r/min的旋转速度在30转速之后卸料，使得混凝土能够有着比较充分的搅拌。
1. When the vehicle is unloading, if there is water evaporation or low slump that cannot meet the customer's requirements, an appropriate amount of water can be added to the cylinder, and then the material can be unloaded at a rotation speed of 10-14 r/min after 30 rpm, so that the concrete can be mixed more thoroughly.
2、混凝土在进行了运输的过程里，其罐体是须禁止停动的，因为罐体停转是会导致了混凝土出现凝结的情况，在停转之后在重新启动也会对减速机和液压系统造成了一定的冲击性，会损坏了马达以及液压泵。
2. During the transportation of concrete, the tank must not be stopped, as stopping the tank can cause concrete to solidify. Restarting after stopping can also have a certain impact on the reducer and hydraulic system, damaging the motor and hydraulic pump.
3、车内水箱的水量是需要时常都加注满的，以避免有不时之需。在水箱加满水之前，应该是要把放气阀打开，将箱体内的空气都放掉。在冲洗的时候要打开启发，冲洗结束或者是停止使用的时候，是需要将水关中的气体放掉的。尤其是在冬季停放的时候，供水系统以及水箱中不能够有剩的水。
3. The amount of water in the car's water tank needs to be filled frequently to avoid unexpected needs. Before filling the water tank with water, it should be necessary to open the vent valve and release all the air inside the tank. When flushing, it is necessary to turn on the inspiration. When flushing is completed or stopped, it is necessary to release the gas from the water outlet. Especially during winter parking, there should be no remaining water in the water supply system and water tank.
4、全自动搅拌车在公路上进行行驶的时候，其加长溜槽应该是要放置在卸料溜槽的支架上面并且是使用挂钩挂牢固的，不能够让挂在主排料溜槽上运作。主排料溜槽需要旋转到一个固定的位置，在拉下将其定位的手柄，将锁紧手柄瘫痪变幅机构锁起，以免防止了因为其不固定的摇摆造成了事故以及影响到了其他车辆的正常行驶。
4. When the fully automatic mixer truck is driving on the highway, its extended chute should be placed on the bracket of the discharge chute and firmly hung with a hook, and it should not be allowed to operate on the main discharge chute. The main discharge chute needs to be rotated to a fixed position. After pulling down the handle that positions it, the locking handle is paralyzed and the luffing mechanism is locked to prevent accidents caused by its unstable swing and affecting the normal operation of other vehicles.
5、满载的混凝土正在是正转的时候若是需要反转，那么就需要操控手柄使其能够正传挺稳之后，在操控手柄让其反转。不可再进行正转的时候操控手柄让其反转。
5. If it is necessary to reverse the fully loaded concrete when it is in forward rotation, then it needs to be controlled by the joystick to make it stable and stable, and then it needs to be reversed by the joystick. When the forward rotation is no longer possible, control the handle to reverse it.
此外车辆处于空载的驾驶过程中，搅拌筒不能够停转，以免在行驶的过程中在颠簸的时候所造成了拖轮以及滚道的磕碰使其出现了异常的损坏，还有什么疑惑或者需求，就来我们网站https://www.jfjiaobanche.com咨询吧！
In addition, when the vehicle is driving with no load, the mixing drum cannot stop rotating to avoid abnormal damage caused by the collision of the tugboat and raceway during the bumpy driving process. If you have any doubts or needs, please come to our website https://www.jfjiaobanche.com Consult!
下一篇：自上料搅拌车散热器的认识上一篇：全自动搅拌车开工干活要注重什么事项
