如何清洗中科混凝土搅拌机的搅拌筒和进出料口？
中科混凝土搅拌机的清洗系统的主要作用是清洗搅拌筒，有时也用于运输途中进行干料搅拌。混凝土搅拌机作为运输用汽车，要做好维修和护理，在做好日常维护的方面，也要注意对混凝土搅拌机进行清洗。混凝土会在短时间内凝固成硬块，且对钢材和油漆有一定的腐蚀性，所以每次使用完混凝土搅拌机后要洗净粘附在进出料口的混凝土，那么具体应该如何维护和清洗混凝土搅拌机呢？
The main function of the cleaning system of Zhongke concrete mixer is to clean the mixing drum, and sometimes it is used for dry material mixing during transportation. As a transport vehicle, the concrete mixer should be well maintained and cared. In the aspect of daily maintenance, attention should be paid to the cleaning of concrete mixer. The concrete will solidify into a hard block in a short time, and has certain corrosivity to steel and paint. Therefore, after using the concrete mixer, the concrete adhering to the inlet and outlet should be cleaned. How to maintain and clean the concrete mixer?
一、如何维护和清洗混凝土搅拌机
1、 How to maintain and clean concrete mixer由于混凝土会在短时间内凝固成硬块，且对钢材和油漆有一定的腐蚀性，所以每次使用混凝土贮罐后，洗净粘附在混凝土贮罐及进出料口上的混凝土是每日维护必须认真进行的工作。其中包括：
Since the concrete will solidify into a hard block in a short time, and has certain corrosivity to steel and paint, it is a daily maintenance work to clean the concrete adhered to the concrete storage tank and the inlet and outlet after each use of the concrete tank. These include:
1、每次装料前用水冲洗进料口，使进料口在装料时保持湿润；2、在装料的同时向随车自带的清洗用水水箱中注满水；3、装料后冲洗进料口，洗净进料口附近残留的混凝土；4、到工地卸料后，冲洗出料槽，然后向混凝土贮罐内加清洗用水30-40 L，在车辆回程时保持混凝土贮罐正向慢速转动；5、下次装料前切记放掉混凝土贮罐内的污水；6、每天收工时彻底清洗混凝土贮罐及进出料口周围，保证不粘有水泥及混凝土结块。
1. Before each loading, flush the inlet with water to keep the inlet wet during loading; 2. Fill the water tank for washing water provided with the vehicle at the same time of loading; 3. Wash the inlet after loading to clean the residual concrete near the inlet; 4. After unloading at the construction site, wash the discharge tank, and then add 30-40 cleaning water into the concrete storage tank 50. Keep the concrete tank rotating slowly in the forward direction when the vehicle returns; 5. Remember to discharge the sewage in the concrete tank before the next loading; 6. Thoroughly clean the concrete storage tank and the surrounding of the material inlet and outlet at the end of each day to ensure that there is no cement and concrete caking.
清洗混凝土搅拌机一定要认真，一次清洗不干净，对以后使用时会有很大的影响。
The concrete mixer must be cleaned carefully. If it is not cleaned at one time, it will have a great impact on the future use.
二、混凝土搅拌机如何售后保养
2、 How to maintain the concrete mixer after sale1、合理确定保护周期
1. Reasonable determination of protection period汽车保护周期是指汽车保护的距离里程或工夫。车主在实践运用进程中，应参照汽车制造厂引荐的保护周期，联系汽车本身的技能情况和运用前提，对保护周期进行恰当的调整。普通来说，新车在优越的路况前提下运用，无须过于频繁地保护，以厂家规则的保护周期作为上限便可；而汽车技能情况较差，或运用前提恶劣，则应恰当缩短保护周期。
Vehicle protection cycle refers to the distance, mileage or time of vehicle protection. In the process of practical application, car owners should refer to the protection cycle recommended by automobile manufacturers, and adjust the protection cycle according to the skills and application premise of the car itself. Generally speaking, if a new car is used under superior road conditions, it is not necessary to protect it too frequently, but the protection period specified by the manufacturer's rules can be used as the upper limit. However, if the vehicle skills are poor or the premise is bad, the protection period should be appropriately shortened.
2、充沛应用检测
2. Abundant application, free detection
混凝土搅拌机生产厂家展开的检测运动对车主长短常有益处，车主可以应用这些检测运动对喜欢车进行具体体检，实时发现并扫除一些潜在的毛病，然后省去了未来能够呈现的高额维修保护费用。
The free inspection campaign launched by the concrete mixer manufacturer is often beneficial to the owner's length. The owner can use these inspection activities to carry out specific physical examination on the favorite car, discover and eliminate some potential problems in real time, and then save the high maintenance and protection costs that can be presented in the future.
3、尽能够少崩溃维修总成
3. Repair the assembly as little as possible很多混凝土搅拌机主都有这种感觉，喜欢车的某个总成在崩溃维修后便一发不可拾掇，使车辆过早进入维修期。呈现这种景象的缘由首要触及修缮工的装配技能和配件质量等方面。因而，更好防止崩溃维修总成，应用各类进步前辈的技能保护设备和伎俩，对汽车进行免拆保护，以防止给汽车总成和部件形成的不用要毁伤，进步保护质量，然后降低维修总费用。
Many concrete mixer owners have this feeling, like a car assembly in a breakdown repair can not be sorted out, so that the vehicle early into the maintenance period. The reason for this kind of scene is mainly related to the repair workers' assembly skills and parts quality. Therefore, it is better to prevent the collapse of the maintenance assembly, apply all kinds of advanced technology protection equipment and tricks to protect the car from disassembly, so as to prevent the formation of automobile assembly and components without damage, improve the protection quality, and then reduce the total cost of maintenance.
以上是关于如何清洗混凝土搅拌车的搅拌筒和进出料口的内容介绍，希望对大家有所帮助，如想了解更多内容欢迎点击我们的中科混凝土搅拌机www.jfjiaobanche.com网站。
The above is about how to clean the mixing drum and the import and export of the concrete mixer. I hope it will help you. If you want to know more, please click our Zhongke concrete mixer www.jfjiaobanche.com Website.
