搅拌车上装应该了解的7个小常识
全自动搅拌车实际上在运行时还是存在一定的危险系数的，因此需要操作人员来提前进行充足的了解，下面全自动搅拌车厂家就来讲讲搅拌车上装应该了解的7个小常识。
In fact, there is a certain risk factor in the operation of the full-automatic mixer truck. Therefore, the operators need to know enough in advance. Here, the manufacturer of the full-automatic mixer truck will talk about seven common knowledge that should be understood when loading the mixer truck.
一、搅拌车拖轮是干什么的？
1、 What is the tug of the mixer?
搅拌车拖轮是个轴承，用这个把罐体支撑起来，它是与搅拌车是一体的，辅助搅拌。
The tug of the mixer truck is a bearing, which is used to support the tank. It is integrated with the mixer truck to assist mixing.
二、搅拌车液压泵怎么换油？
2、 How to change the oil of the hydraulic pump of the mixer truck?
一般不建议自己换，直接到售后点找人事更换，而且使用的油必须符合要求，不然对设备损害很大，使用寿命也会大大缩短，应更换合理标号的液压油。
Generally, it is not recommended to replace it by yourself. Go directly to the after-sales point to find professional personnel to replace it. Moreover, the oil used must meet the requirements, otherwise the equipment will be greatly damaged and the service life will be greatly shortened. The hydraulic oil with reasonable grade should be replaced.
三、搅拌车罐体填充率跟罐体的倾角有什么关系？
3、 What is the relationship between the filling rate of the mixer tank and the inclination of the tank?
目前搅拌车倾角在12度左右，填充率为63%左右。倾角不好测量，填充率也很难计算。目前销售搅拌车都以有效搅拌容积为准。
At present, the inclination angle of the mixer truck is about 12 degrees, and the filling rate is about 63%. The inclination angle is difficult to measure and the filling rate is difficult to calculate. At present, all mixer trucks sold are subject to the effective mixing volume.
四、搅拌车罐不转，转开了没力而液压油从油箱加油口喷出来是什么原因？
4、 What is the reason why the tank of the mixer truck does not rotate, and the hydraulic oil is sprayed out from the oil tank filler after it is turned without force?
液压一个进一个回，进没力可能是油泵封闭部分坏了。回油冲，可能是油泵封闭脚垫坏了，可以换个脚垫试试。
The hydraulic pressure goes in and out one by one. It may be that the sealing part of the oil pump is broken. The oil return is flushed. It may be that the sealing foot pad of the oil pump is broken. You can try a new one.
五、搅拌车搅拌桶的转速是多少？
5、 What is the rotation speed of the mixer drum?
进料时搅拌筒的转速：6—10转/分；搅拌时搅拌筒的转速：6—10转/分。
Speed of mixing drum during feeding: 6-10 rpm; Speed of mixing drum during mixing: 6-10 rpm.
六、8-12方的搅拌车进料口到地面距离是多少？
6、 What is the distance from the feed port of the mixer truck of 8-12 square meters to the ground?
一般8-12方的搅拌车整车高度大概在3.8米左右，进料口距离地面就有3.5米左右，具体情况取决于不同的车型。
Generally, the height of 8-12 square mixer truck is about 3.8 meters, and the distance between the feed inlet and the ground is about 3.5 meters, depending on different models.
七、搅拌车怎么清洗罐？
7、 How does the mixer clean the tank?
搅拌车配的水箱，每次卸完料后就应该将水放入罐体内，在返回时搅拌行驶，到搅拌站后再将水排出接料。罐体外表应该在水箱加水时即可顺便清洗。当然也可以直接用水箱内的水清洗。如果水泥浆已经凝固，罐体内找的清罐，外表凝固用草酸刷洗就行了。
For the water tank equipped with the mixer truck, the water shall be put into the tank after unloading each time, and the water shall be mixed and driven when returning. After reaching the mixing station, the water shall be discharged to receive the materials. The surface of the tank should be cleaned when the water tank is filled with water. Of course, it can also be directly cleaned with water in the water tank. If the cement slurry has been solidified, find a professional cleaning tank in the tank, and brush the surface with oxalic acid.
搅拌车上装应该了解的7个小常识相关内容就是这样了，您对此有什么想了解的问题可以随时来咨询我们https://www.jfjiaobanche.com！
That's all about the 7 common knowledge you should know when loading the mixer truck. If you have any questions about this, please feel free to consult us https://www.jfjiaobanche.com ！
下一篇：搅拌车驾驶时要注意许多类难题了上一篇：二手自上料搅拌车的购买技巧
