自上料搅拌车罐体中的剩料怎么清理
自上料搅拌车在进行工作时，它重要的部件罐体中会有搅拌料的存在，而当工作完毕后，往往会有一些剩料出现，那么这要怎么清理呢？下面混凝土自上料搅拌车厂家为您讲解。
When the loading mixer is working, there will be mixing materials in its important parts, the tank, and when the work is completed, there will often be some leftovers, so how to clean up? Next, the manufacturer of concrete self loading mixer will explain it to you.
1、关闭控制室内电源开关，挂上“禁止合闸”警示牌。
1. Turn off the power switch in the control room and hang the warning sign of "No switching on".
2、通知自上料搅拌车死机，与自上料搅拌车铲斗对准主机下料口接料。
2. Notify the self feeding mixer to stop working, and align the bucket of the self feeding mixer with the main machine discharge port to receive materials.
3、打开仓门，工作人员穿戴好防护用具进入主机内，用铁锨，风炮等工具清理未搅拌完混凝土。
3. Open the warehouse door, the staff shall wear protective equipment and enter the main machine, and clean the unmixed concrete with shovel, air cannon and other tools.
4、打开自上料搅拌车卸料门，卸掉可以能卸掉的未搅拌完混凝土。
4. Open the discharge door of the self loading mixer truck to unload the unmixed concrete that can be unloaded.
5、罐体内的混凝土清理完后，工作人员检查主机内叶片是否损坏，直工作人员确认主机内底板，叶片完好，工作人员出主机后，关闭主机仓门。
5. After the concrete in the tank is cleaned, the staff shall check whether the blades in the main engine are damaged until the staff confirm that the inner bottom plate and blades of the main engine are in good condition. After leaving the main engine, the staff shall close the main engine compartment door.
6、在确定通电或者车辆运行正常情况下，工作人员观察斜皮带，平皮带上的石子，砂情况，配合控制室操作员通过装载机清理掉。
6. When it is confirmed that the power is on or the vehicle is running normally, the staff shall observe the gravel and sand on the inclined belt and flat belt, and cooperate with the operator in the control room to clean them through the loader.
7、清理完废料，斜皮带，平皮带上砂，石子后，进行混凝土正常生产。
7. After the waste materials are cleaned, the inclined belt and the flat belt are sanded, and the stones are removed, the normal production of concrete is carried out.
要是搅拌车在使用的过程中出现了问题，不能够进行运转了就要把里面的混凝土及时排除出来，要是混凝土凝结在罐体里面，会对车辆造成腐蚀的。更多注意事项可以来我们网站https://www.jfjiaobanche.com咨询了解！
If there are problems in the use of the mixer and the mixer cannot operate, the concrete inside must be removed in time. If the concrete condenses in the tank, it will cause corrosion to the vehicle. More precautions can be found on our website https://www.jfjiaobanche.com Ask about it!
