中科搅拌车:自动上料搅拌车主机多久清理一次好呢？
自动上料搅拌车,是一种结合了混凝土运输车和混凝土搅拌站功能为一体,集混凝土装料、计量、搅拌、出料于一身,并可实现混凝土运输和现场混凝土施工作业的搅拌设备。那么中科搅拌车主机多久清理一次合适呢？
Automatic loading mixer is a kind of mixing equipment which combines the functions of concrete transport vehicle and concrete mixing station, integrates concrete loading, metering, mixing and discharging, and can realize concrete transportation and on-site concrete construction. So, how often is it appropriate to clean the main engine of China Science mixer?
自动上料搅拌车的控制技术要求
Technical requirements for control of automatic feeding mixer
1.各筒体，控制阀，电机按混凝土搅拌过程的要求运行，各筒体，控制阀，电机的控制要准确，稳定，可靠。自上料混凝土搅拌车厂家它可装运由搅拌厂（站）生产的混凝土或按配比混合的骨料（砂、石子）、水泥和水，在运输过程中，不断对湿料慢慢搅拌，防止混凝土在运输过程中初凝和离析。
1. Each cylinder, control valve and motor shall operate according to the requirements of concrete mixing process, and the control of each cylinder, control valve and motor shall be accurate, stable and reliable. From the manufacturer of loading concrete mixer, it can transport concrete produced by mixing plant (station) or aggregate (sand, stone), cement and water mixed according to the proportion. During transportation, wet materials are mixed slowly to prevent initial setting and segregation of concrete during transportation.
控制系统有自动和手动两种工作方式，它们相互独立，相互制约。
The control system has two working modes, automatic and manual, which are independent and restrict each other.
2.系统发展具有一个良好的抗干扰能力和完善的报警自保护管理功能.
2. The system has a good anti-interference ability and perfect alarm self-protection management function
3.通过与计算机通讯,可以进行显示信息系统管理工作状态、故障报警.
3. Through communication with computer, it can display information system, manage working state and give fault alarm
它的主机多久清洗一次合适呢？
How often is it appropriate to clean the main engine?
一个工作周期内中科搅拌车主机系统少应清洗1次。每天可以生产活动结束后，则应对搅拌车主机信息进行比较全 面的清洗，方法是：在清洗服务过程中，将水及少许石子放进搅拌主机内通过搅拌5～10min，清洗后将机内物料管理全部有效，不得有积水、积料;停机后再冲洗以及管道，搅拌罐内外环境灰尘和粘附的混凝土。一般这种情况下，JS1000型搅拌设备主机之间加水约150～180kg左右，其他产品型号选择主机可据此分析增减，也可自备高压水枪或者进行数据清理。
The main engine system of Zhongke mixer should be cleaned at least once in a working cycle. After the end of production activities every day, the information of mixer truck host should be comprehensively cleaned. The method is: in the process of cleaning service, water and a few stones are put into the mixing machine and stirred for 5-10 minutes. After cleaning, all materials in the mixer can be effectively removed, and there is no water and accumulated material; After shutdown, wash and pipe to remove dust and adhered concrete inside and outside the mixing tank. In general, about 150-180kg of water is added between the main machines of JS1000 mixing equipment, and the main machine of other product models can be used to analyze the increase or decrease, or the high-pressure water gun can be provided or the data can be cleaned up.
在冲洗搅拌主机料门时，应避免上部冲洗下的积料形成异物卡滞料门现象。搅拌过程中，若混凝土运输车较长时间没有到位(超过20～30min，尤其在夏季)，应加水对搅拌机进行简易清洗。
When washing the material gate of the mixing machine, it is necessary to avoid foreign matters blocking the material gate caused by the accumulated material under the upper washing. In the mixing process, if the concrete transport vehicle is not in place for a long time (more than 20-30 min, especially in summer), the mixer should be simply cleaned with water.
搅拌车设备正常生产期间，要定期检查搅拌筒内及搅拌轴上混凝土的凝固情况，如有凝结应及时按要求进行人工铲除。人工清理搅拌筒前，必须切断电源、气路，放净余气、锁好控制室;人工清理搅拌筒时，严禁猛烈敲击搅拌轴、搅拌臂及搅拌叶片。
During the normal production of mixer truck equipment, it is necessary to regularly check the solidification of concrete in the mixing drum and on the mixing shaft. If there is condensation, it should be removed manually according to the requirements. Before manually cleaning the mixing drum, the power supply and gas path must be cut off, the residual gas must be released, and the control room must be locked; when manually cleaning the mixing drum, it is strictly forbidden to knock the mixing shaft, mixing arm and mixing blade violently.
自动上料搅拌机用冲洗充电门，上部冲洗避免夹在充电门的现象形成的异物积累的材料时的搅拌主机设备。混合过程中，如果不再有在现浇混凝土卡车（超过20?30分钟，尤其是夏天），水应加入搅拌机，便于清洗。
The automatic charging mixer is used to flush the charging door, and the upper part is used to wash the mixing host equipment to avoid the accumulation of foreign matters formed by the phenomenon of clamping in the charging door. During the mixing process, if there is no longer a cast-in-place concrete truck (more than 20? 30 minutes, especially in summer), water should be added to the mixer for easy cleaning.
以上就是”中科搅拌车主机多久清理一次好呢”介绍，希望对大家有所帮助，如想了解更多资讯内容请点击我们的网站：https://www.jfjiaobanche.com。
The above is the introduction of "how often to clean up the main engine of China Science and technology mixer". I hope it can help you. For more information, please click our website: https://www.jfjiaobanche.com 。
