自上料搅拌车离合器不分离怎么办？
自上料搅拌车的零部件都是很重要的，如果不好好维护好就会出现问题，可能会导致搅拌车的不能使用。那么自上料搅拌车离合器不分离怎么办？
Since the feeding mixer parts are very important, if not well maintained, there will be problems, may lead to the mixer can not be used. So since the feeding mixer clutch does not separate how to do?
要先检查下离合油壳里的刹车油是否够用，如果油不够，离合怎么可能会生效？如果油量检查正常，那么先上车多踩几脚离合，看是否挂档有，那么是因为离合油路中存在空气，先排空气再试试。
First check whether the brake oil in the clutch oil shell is enough. If the oil is not enough, how can the clutch take effect? If the oil check is normal, then first get on the car and step on a few feet of clutch to see if there is gear, then because there is air in the clutch oil road, exhaust air and try again.
如果油够的活，请检查离合总泵、离合分泵四周有无漏油现象，自上料搅拌车厂家认为如果有漏油，在不考虑维修，只单单考虑问题的情况下，更换漏油的分泵或总泵处理。
If the oil is enough to live, please check whether there is oil leakage around the clutch main pump and clutch sub-pump. Since the feeding mixer manufacturer thinks that if there is oil leakage, it will replace the sub-pump or the main pump without considering maintenance and only considering solving the problem.
更换好漏油的总泵或分泵后，再次给离合总泵处的油壳加入刹车油；再找另外一人帮你起动一面猛踩离合踩到次数踩住不放，另一个人在下面排空气，排完后锁紧空气螺丝，再重复上述流程。
After replacing the oil leakage of the main pump or sub-pump, add brake oil to the oil shell at the clutch main pump again; Find another person to help you start while stomping on clutch and clutch to the number of times, another person to exhaust air below, after exhaust, lock the air screw, and repeat the above process.
直到排到离合感觉高起来，放空气螺丝放不出气泡出来为止。锁紧放空气螺丝，同时检查离合分泵及总泵两者的分享推杆的自由间隙，一般为两到三毫米左右，手感有点间隙则可。
Until the clutch feels high and the vent screw can't let the bubbles out. Lock the air outlet screw, and check the free clearance of the clutch sub-pump and the master pump sharing push rod, generally about two to three millimeters, if there is a gap in the hand feel.
自上料搅拌车离合器不分离怎么办？以上便是问题的相关内容，如果您的搅拌车有什么问题或者您想咨询问题，就来网站www.jfjiaobanche.com看看吧！
Since the feeding mixer clutch does not separate how to do? The above is the related content of the problem. If you have any problems with your mixer or you want to consult questions, come to the website www.jfjiaobanche.com and have a look!
