如何保持全自动搅拌车的良好性能？
如何保持全自动搅拌车的良好性能？
How to maintain the good performance of automatic mixer?
1.日常操作后，驾驶员应将清水倒入混合罐中，以高速（14-18 rpm）旋转5-10分钟，排干水并确保滚筒清洁。用高压水清洁混合桶的所有零件时，必须注意不要使用诸如外观或操纵杆之类的零件。压力水喷嘴与车身涂料外部之间的距离应少为40厘米。
1. After daily operation, the driver should pour clean water into the mixing tank, rotate at high speed (14-18 RPM) for 5-10 minutes, drain the water and ensure that the drum is clean. When cleaning all parts of the mixing drum with high-pressure water, care must be taken not to use parts such as appearance or control lever. The distance between the pressure water nozzle and the exterior of the body paint shall be at least 40 cm.
2.在施工现场卸货后，请使用配有自动混凝土搅拌机的料斗，料斗，卸料斜槽等清洁污泥和粘附在主体上的混凝土。在返回搅拌站的途中，应将150-200升水倒入搅拌罐中，以除去搅拌罐壁和叶片上的任何混凝土残留物。液压系统的压力必须符合使用说明书，并且不能随意调节。液压油的质量和数量必须符合原始要求。
2. After unloading at the construction site, please use the hopper, hopper and discharge chute equipped with automatic concrete mixer to clean the sludge and the concrete adhered to the main body. On the way back to the mixing plant, 150-200 liters of water should be poured into the mixing tank to remove any concrete residue on the tank walls and blades. The pressure of the hydraulic system must conform to the instruction manual and cannot be adjusted at will. The quality and quantity of hydraulic oil must meet the original requirements.
3.在冬季工作期间，您需要执行以下操作：开始之前请检查冰块。下班后，仔细冲洗混合水箱和供水系统中的剩余水，关闭泵，将控制手柄置于“停止”位置。
3. During the winter work, you need to do the following: please check the ice before you start. After work, carefully flush the remaining water in the mixing water tank and water supply system, turn off the pump and put the control handle in the "stop" position.
4.了解全自动搅拌车的结构，工作原理和操作方法可以保证设备的更好性能！
4. Understanding the structure, working principle and operation method of automatic mixer can ensure better performance of the equipment!
以上就是关于"如何保持全自动搅拌车的良好性能"的介绍，希望对大家有所帮助。
The above is about "how to maintain the good performance of automatic mixer" introduction, I hope to help you.
