自上料搅拌车厂家直销

品质创造未来,爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 行业动态混凝土搅拌车的混凝土凝固的快速方式!

混凝土搅拌车的混凝土凝固的快速方式!

来源:https://www.jfjiaobanche.com 浏览:0发表时间:2023-06-14
商品混凝土水泥搅拌运输车发生故障时时候,若没有及时将搅拌罐内的清理出来,时间一久将会凝固,会给我们带来很大的经济损失。那么你知道在紧急情况下如何清理水泥搅拌运输车内商品混凝土吗?接下来简单介绍一下。
When a commercial concrete cement mixer truck malfunctions, if the mixing tank is not cleaned in a timely manner, it will solidify over time, which will bring us great economic losses. Do you know how to clean the commercial concrete inside the cement mixer truck in an emergency? Next, let's briefly introduce it.
方法一:
Method 1:
1、准备好紧急驱动软管,将故障商品混凝土水泥搅拌运输车熄火,卸下液压的马达上的高压油管接头。
1. Prepare the emergency drive hose, turn off the faulty commercial concrete cement mixer truck, and remove the high-pressure oil pipe connector from the hydraulic motor.
2、将救援车熄火,将其液压的马达的高压油管卸下,并与故障车上的对应接头用紧急驱动软管相连。
2. Turn off the rescue vehicle, remove the high-pressure oil pipe of its hydraulic motor, and connect it to the corresponding connector on the faulty vehicle using an emergency drive hose.
3、发动救援车,将其操纵手柄拨出料位置,故障车内的商品混凝土即被排出。
3. Start the rescue vehicle, move its control handle to the discharge position, and the commercial concrete inside the faulty vehicle will be discharged.
4、紧急驱动完毕后,将驱动软管卸下,并恢复两车原状。
4. After the emergency drive is completed, remove the drive hose and restore both vehicles to their original state.
全自动搅拌车厂家
方法二:
Method 2:
1、若个方法实行有困难,则采用以下方法,立即排出商品混凝土。
1. If there are difficulties in implementing this method, use the following method to immediately discharge the commercial concrete.
2、在托轮和滚道之间放入木楔,以控制搅拌筒的旋转,一定要注意;将发动机熄火,拆松液压的马达的一根高压油管,搅拌筒可随意旋转,控制搅拌筒的旋转,使维修孔转到下部,然后打开维修孔,清理出筒内商品混凝土。此时一定要注意,商品混凝土排出完毕后,恢复商品混凝土水泥搅拌运输车原状。紧急清理水泥搅拌运输车内商品混凝土是我们每个水泥搅拌运输车司机都应该会的,在水泥搅拌运输车发生故障的时候,及时清理,将损失降到低。
2. Place a wooden wedge between the supporting wheel and the raceway to control the rotation of the mixing drum, and be sure to pay attention; Turn off the engine, loosen a high-pressure oil pipe from the hydraulic motor, and the mixing cylinder can rotate freely. Control the rotation of the mixing cylinder to turn the maintenance hole to the lower part. Then open the maintenance hole and clean the commercial concrete inside the cylinder. At this point, it is important to note that after the commercial concrete is discharged, the cement mixing and transportation vehicle for commercial concrete should be restored to its original state. Urgently cleaning the commercial concrete inside the cement mixer truck is something that every cement mixer truck driver should know. When the cement mixer truck malfunctions, it should be cleaned in a timely manner to minimize losses.
感谢您的阅读,此文的文章来源:全自动搅拌车厂家更多的内容和问题请点击:https://www.jfjiaobanche.com 我们会继续努力的为您提供服务,感谢您的支持!
Thank you for reading. The source of this article is from the manufacturer of fully automatic mixing trucks. For more information and questions, please click on: https://www.jfjiaobanche.com We will continue to work hard to provide you with services. Thank you for your support!