搅拌车转向轮轮胎胎面或两边不正常磨损的原因
在自上料搅拌车四轮定位检测中，经常会遇到驾驶员朋友前来要求轮胎磨损的问题。还有的车辆在定位检测中发现前束数值超差太大，经检查轮胎已经磨损。下面自上料搅拌车厂家主要来讲讲搅拌车转向轮轮胎胎面或两边不正常磨损的原因。
In the four wheel positioning detection of self loading mixer, the driver friends often come to solve the problem of tire wear. In other vehicles, the toe in value is found to be too out of tolerance during positioning detection, and the tires have been worn after inspection. The following is mainly about the causes of abnormal wear of the steering wheel tire tread or both sides of the mixer truck from the charging mixer truck manufacturer.
轮胎胎面或两边不正常磨损
Abnormal wear of tire tread or both sides
方法：检查胎压是否过低或轮胎质量是否过关。不要贪图便宜使用三无轮胎。轮胎的钢圈是否失圆，做个动平衡。检查前束尺寸、转向拉杆球头是否松旷，方向机固定螺丝有没有松动。转向桥主轴或压力轴承是否磨损严重变形或损坏。
Solution: Check whether the tire pressure is too low or the tire quality is up to standard. Don't try to use three no tires cheaply. Check whether the steel rim of the tire is out of round and conduct dynamic balance. Check the toe in size, whether the steering rod ball head is loose, and whether the steering gear fixing screws are loose. Whether the main shaft or pressure bearing of the steering axle is seriously worn, deformed or damaged.
后轮轮胎胎面呈不规则型磨损
The tread of the rear wheel tire is worn irregularly
方法：检查钢圈，轮毂螺丝及轴头螺丝是否松动。检查自上料搅拌车的刹车毂是否失圆。弹簧板和弓卡固定螺丝是否有松动。日常勤检查轮胎气压，要看看轮胎胎面的磨损情况。早发现早修理，把损失降到低限度
Solution: Check whether the steel ring, hub screws and shaft head screws are loose. Check whether the brake hub of the self feeding mixer is out of round. Check whether the fixing screws of spring plate and bow clamp are loose. Check the tire pressure frequently and check the wear of the tire tread. Early detection and early repair to minimize losses
轮胎中间部分的早期磨损
Early wear of the middle part of the tire
方法：适当提高轮胎充气量，可以减小轮胎与路面的接触面积，从而减小轮胎的滚动阻力，节约燃油。但充气量过大时，不但影响轮胎的减振性能，还会使轮胎变形量过大，与地面的接触面积太小，磨损只能由胎面部分承担，形成早期磨损。
Solution: Properly increasing the tire inflation can reduce the contact area between the tire and the road, thus reducing the rolling resistance of the tire and saving fuel. However, when the inflation volume is too large, it will not only affect the damping performance of the tire, but also make the tire deform too much, the contact area with the ground is too small, and the wear can only be borne by the tread, forming early wear.
定期检查全自动搅拌车轮胎气压以及胎面花纹，另外每行驶8000-10000对全自动搅拌车轮胎进行前后或交叉调位(视具体车型而定)等，都可以很好的保护好全自动搅拌车轮胎。更多相关内容就来我们网站https://www.jfjiaobanche.com进行咨询吧！
Regularly check the tire pressure and tread pattern of the fully automatic mixer. In addition, every 8000-10000 km, adjust the tires of the fully automatic mixer forward and backward or cross (depending on the specific model), which can protect the tires of the fully automatic mixer well. More relevant content will come to our website https://www.jfjiaobanche.com Consult!
