中科自上料搅拌车发动机水温过高,如何它?
由于中科自上料搅拌车是一种特殊的工作车辆，它有自己特定的工作环境，但是长时间、高强度的工作运行会在温度过高时出现发动机水温过高的问题，司机应该如何妥善处理?今天就和小编一起来学习吧。
As the self loading mixer is a special working vehicle, it has its own specific working environment, but long-term and high-intensity operation will cause the problem of high engine water temperature when the temperature is too high. How should the driver handle it properly? Let's learn from the editor today.
如果在一条普通的高速公路上，发动机过热，尽可能快地减速，把车开到阴凉的地方或者凉快点的地方，然后停下来。然后打开引擎盖，让发动机空转，等待发动机温度逐渐恢复正常。此时，大部分混合器发动机的冷却水可能严重不足。按规定数量补充冷却水后，再次检查冷却系统，确认无其他故障，即可启动发动机继续行驶。
If the engine overheats on an ordinary highway, slow down as fast as possible, drive to a cool place or a cool place, and then stop. Then open the engine hood, let the engine idle and wait for the engine temperature to gradually return to normal. At this point, most mixer engines may have a serious shortage of cooling water. After replenishing the cooling water according to the specified quantity, check the cooling system again and confirm that there are no other faults, then start the engine and continue driving.
在这种情况下，还要检查水箱百叶窗是否有异物堵塞，风机叶片的工作情况，发动机皮带是否滑动，发动机泵的工作情况。当这些问题被确认为正常时，我们就可以正常运行了。
In this case, it is also necessary to check whether the water tank louver is blocked by foreign matters, whether the fan blades are working, whether the engine belt is sliding, and whether the engine pump is working. When these problems are confirmed as normal, we can operate normally.
以上是中科自上料搅拌车发动机水温过高的处理方法，希望今天小编的介绍能对大家有所帮助，以后使用时能更加得心吊手。
The above is the treatment method for the high water temperature of the engine of the self feeding mixer of China Science and Technology Corporation. I hope that the introduction of today's small edition can be helpful to you, and you can use it more carefully in the future.
