As we all know, the working environment of the concrete mixer is relatively bad, and as an engineering vehicle, the body of the mixer is heavy, if you need to reverse, you need to master the relevant driving skills to ensure safety, but for many novice drivers, it is still very difficult to make the concrete mixer pour out smoothly, so this paper puts forward some suggestions For you to sort out the following tips, please read together.

◆非”字形倒车

Non reversing

所谓的“非”字形倒车就是两辆并排停着，中间有一个停车位，这样的倒车方法是：先将混凝土搅拌车开到距离车位线旁边约1.5米的位置，让自己搅拌车的驾驶位置处于隔车中间位置时，向左打满舵，然后向后倒车。当你确认自己的车头摆正时，马上回正车轮向后倒车，这样车就可以准确地停到车位上。反方向倒车也是如此，只需要将方向盘打满舵的方向调整一下就可以了。为了确认这种停车方法的有效性，实验了一下，按照上述方法进行操作，结果真的很管用，搅拌车很顺利地停进了停车位。倒车时车速要慢，要通过后视镜观察自己的混凝土搅拌车与旁边两车的距离，切勿心急。

The so-called "non" shape reversing means that two cars are parked side by side with a parking space in the middle. This reversing method is: first drive the concrete mixer to a position about 1.5 meters away from the parking line, and when the driving position of the mixer is in the middle of the car, turn the rudder to the left, and then reverse. When you make sure that your car is in the right position, you should return to the right wheel and back up, so that the car can stop in the parking space accurately. Reverse direction reversing is the same. Just adjust the steering wheel with full rudder. In order to confirm the effectiveness of this parking method, the experiment is carried out, and the operation is carried out according to the above method. The result is really effective, and the mixer is successfully parked in the parking space. When reversing, the speed should be slow. You should observe the distance between your concrete mixer truck and the two cars nearby through the rear-view mirror. Don't be impatient.
            

◆“一”字形倒车

"One" reversing

“一”字形倒车其实就是侧方停车，车辆像一个“一”字一样依次排开，这样停车一般都是停在马路边。这种倒车的方法是：先将自己的混凝土搅拌车停到前车左侧约50厘米的地方，自己车与前车保持平行。当自己车的右后视镜与旁边车辆B柱对准的时候，向右打满舵，然后倒车；当自己的搅拌车与前车成45度夹角时（即你自己的车头和前车车尾的连线是一条直线的时候），向左打满舵，继续倒车。当车进入车位时，回轮摆正车身即可。这样倒车需要注意的是当你向左打满舵往车位里倒车时，要时刻观察后视镜，掌握好自己混凝土搅拌车与后车和马路牙子之间的距离，保障。倒车时切记速度要慢，要前后左右都照顾到。

"One" shape reversing is actually side parking, vehicles are arranged in turn like a "one", so parking is generally stopped at the side of the road. This reversing method is: first, park your concrete mixer truck to the left side of the front truck about 50 cm, and keep your truck parallel to the front truck. When the right rear-view mirror of your car is aligned with the B-pillar of the vehicle beside you, turn full rudder to the right, and then reverse; when your mixer is at an angle of 45 degrees with the vehicle in front (that is, when the line between your front and the rear of the vehicle in front is a straight line), turn full rudder to the left, and continue to reverse. When the car enters the parking space, the return wheel can straighten the car body. When reversing like this, you need to pay attention to the fact that when you turn the rudder to the left to reverse into the parking space, you should always observe the rear-view mirror, and master the distance between your concrete mixer and the rear car and the curb, so as to ensure safety. When reversing, remember to be slow and take care of the front, back, left and right.

◆斜线停车

Diagonal parking

斜线停车相对于“非”字停车和“一”字停车要简单些，这种停车方法是：将车开到左后视镜与车位左线对齐的位置，然后向右打满舵前行。当车身与车位成一条直线时开始回轮向后倒车，这样混凝土搅拌车就可以轻松进入车位。

Diagonal parking is simpler than "not" parking and "one" parking. This parking method is: drive the car to the position where the left rear-view mirror is aligned with the left line of the parking space, and then turn the rudder to the right. When the car body is in a straight line with the parking space, start to reverse the wheel, so that the concrete mixer can easily enter the parking space.